If you have a specific Ditch Witch® trencher part or salvaged trenching machine you are looking for, please call
(800) 685-2818 or EMAIL US
Rock & Frost Section
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 1 | B56KRB | Carbide Tooth, Rockbuster (.765 HB) | - |
| 2 | B43KRB | Carbide Tooth, Rockbuster (.735 HB) | - |
| 3 | B56-B | Carbide Tooth, Full Cap (.765 CB) | - |
| 4 | B43-B | Carbide Tooth, Full Cap (.735 CB) | - |
| 5 | B56-C | Carbide Tooth, Half Cap (.765 MB) | - |
| 6 | B43-C | Carbide Tooth, Half Cap (.735 MB) | - |
| 7 | CB43-10 | Tooth Pockets (.735 BLK) | - |
| 8 | CB56-10 | Tooth Pockets (.765 BLK) | - |
| 9 | Puller | Tooth Puller (Standard) | - |
| N/S | Puller | Tooth Puller (Large) | - |
| 10 | N/A | Chain Installer, Small (1.654" through 2") | - |
| N/S | N/A | Chain Installer, Large (3" through 4") | - |
| 11 | B43LH | Carbide Tooth 1/2 Cap w/clip (.735 MRW) | - |
| 12 | B43LRB | Carbide Tooth Rockbuster w/Clip (.735 HR) | - |
| 13 | B43LW | Lock Washers (K 91) | - |
| N/S | C31HD | Carbide Tooth, Rockbuster (.990 HB) | - |
| N/S | C31 | Carbide Tooth, Half Cap (.990 MB) | - |
| N/S | .990 CRF | Carbide Tooth, Full Cap with Flared Shoulder | - |
| 14 | B 43 CW | Clip Wrench |
Note: We have all styles and sizes of Carbide Bits
H-Plate, Terminator® & Bolt-on Rock & Frost Chain,Teeth & Adapters for DitchWitch® Models R100, AR12, R150 using TA4086 Chain (225,000# Test) replaces 4.5" 150,000 Chains
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | TA408608H26 | 4.086”P Welded H-Plate Chain, 8” Cut, 26 Stations | - |
| 2 | N/A | TA408600B26 | 4.086”P Chain, Bare, 26 Stations | - |
| 3 | B 43 LH | - | Carbide Tooth with clip (735 MRW) | - |
| 4 | B 43 LRB | - | Carbide Tooth with clip (735 HR) | - |
| 5 | 765 CRFN | - | Carbide Tooth with clip (Full Cap) | - |
| 6 | B 43 LC | - | Lock Clip Only (K91) | - |
| 7 | B 43 CW | - | Clip Wrench | - |
| 8 | TP 17 | - | Heat Treated Tooth Pocket | - |
| 9 | PL 75-12 | - | 12" Carbide Expander Plate | - |
| 10 | PL 75-14 | - | 14" Carbide Expander Plate | - |
| 11 | PL 75-16 | - | 16" Carbide Expander Plate | - |
| N/S | PL 75-18 | - | 18” Carbide Expander Plate | - |
| N/S | H 300-10L | - | Carbide Holder 10" Cut, L.H | - |
| N/S | H 300-10R | - | Carbide Holder 10" Cut, R.H. | - |
| N/S | H 300-12L | - | Carbide Holder 12" Cut, L.H. | - |
| N/S | H 300-12R | - | Carbide Holder 12" Cut, R.H. | - |
| 12 | H 75-6L | - | Carbide Holder, L.H. 6” | - |
| 13 | H 75-6R | - | Carbide Holder, R.H. 6” | - |
| 14 | H 75-8L | - | Carbide Holder, L.H. 8” | - |
| 15 | H 75-8R | - | Carbide Holder, R.H. 8” | - |
| 16 | SP 2716 | - | 2 7⁄16”Alloy Tube Spacer | - |
| 17 | SP 238 | - | 2 3⁄8”Alloy Tube Spacer | - |
| 18 | SP 11516 | - | 1 15⁄16”Alloy Tube Spacer | - |
| 19 | SP 2116 | - | 2 1⁄16”Alloy Tube Spacer | - |
| 20 | BL 4086-10 | - | Block Spacer – Spacer for 2" Additional Cut | - |
| 21 | T 306706L | - | Terminator Adapter, L.H. 6” | - |
| 22 | T 306706R | - | Terminator Adapter, R.H. 6” | - |
| 23 | T 306708L | - | Terminator Adapter, L.H. 8” | - |
| 24 | T 306708R | - | Terminator Adapter, R.H. 8” | - |
| 25 | T 20034 | - | Terminator Tooth, 3⁄4" V-Carbide | 0.8 |
| 26 | T 20078 | - | Terminator Tooth, 7⁄8" V-Carbide | 0.85 |
| 27 | B 83 LH | - | Carbide Tooth with clip | - |
| 28 | B 83 LC | - | Lock Clip | - |
| 29 | 34 FW | - | 3⁄4” Flat Washer | - |
| 30 | 34 LW | - | 3⁄4” Lock Washer | - |
| 31 | 34 LN | - | 3⁄4” Lock Nut | - |
| 32 | 34412-8 | - | 3⁄4” x 41/2” Gr. 8 Bolt | - |
| 33 | 34500-8 | - | 3⁄4” x 5” Gr. 8 Bolt | - |
| 34 | 34512-8 | - | 3⁄4” x 51/2” Gr. 8 Bolt | - |
| 35 | 34600-8 | - | 3⁄4” x 6” Gr. 8 Bolt | - |
| N/S | 34 TABS | - | 3⁄4” Bolt Seat for TA300 Holder | - |
| 36 | PL 300-16 | - | 16” Carbide Expander Plate | - |
| 37 | PL 300-18 | - | 18” Carbide Expander Plate | - |
| 38 | PL 300-20 | - | 20” Carbide Expander Plate | - |
| N/S | PL 300-22 | - | 22” Carbide Expander Plate | - |
| N/S | PL 300-24 | - | 24” Carbide Expander Plate | - |
Alligator & Bolt-on Rock & Frost Chain,Teeth & Adapters (41⁄2" Pitch 150,000# Test Chain) for DitchWitch® Models R100, AR12, R150
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | AL450008D24 | Welded Alligator Chain, 8” Cut, 24 Stations | - |
| 2 | B 135-812 | B450000B24 | 18'0" Chain, Bare | 360 |
| 3 | B 105-372 | - | Locknut (3⁄4" N.C.) | - |
| 4 | B 105-499 | - | Bolt (3⁄4" x 1 3⁄4") | - |
| 5 | B 135-801 | - | Chain Pin | - |
| 6 | B 135-802 | - | Key | - |
| 7 | B 135-805 | - | Roller Link | - |
| 8 | R 100CL | - | Conn. Link | - |
| 9 | B 136-100 | - | Carbide Bit (Full Cap) (765 CB) | - |
| 10 | B 136-101 | - | Carbide Bit (Half Cap) (765 MB) | - |
| 11 | B 136-102 | - | Carbide Bit (Rock Buster) (765 HB) | - |
| 12 | B 136-060 | - | Bit Adapter (Position 1) | - |
| 13 | B 136-061 | - | Bit Adapter (Position 2) | - |
| 14 | B 136-062 | - | Bit Adapter (Position 3) | - |
| 15 | B 136-063 | - | Bit Adapter (Position 4) | - |
| 16 | 765 BLK | - | Tooth Holder | 0.8 |
| 17 | 765 HDBLK | - | Heavy Duty Tooth Holder | 1 |
Note: MTO adapters can be manufactured upon request.
H-Plate, Terminator®, & Bolt-on Rock & Frost Chain,Teeth and Adapters for TA3110 Ultra Heavy-Duty Chain (165,000# Test Chain) Replaces all 3"P Chains
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | TA311006H32 | Welded H-Plate Chain, 6” Cut, 32 Stations | - |
| 2 | N/A | SH31100632 | Welded Terminator Chain, 6” Cut, 32 Stations | - |
| 3 | B 43 LH | - | Carbide Tooth with clip (735MRW) | - |
| 4 | B 43 LC | - | Lock Clip Only (K91) | - |
| 5 | B 43 LRB | - | Rockbuster Bit with clip | - |
| 6 | 765 CRFN | - | Full Cap Carbide Bit with clip | - |
| 7 | B 43 CW | - | Clip Wrench | - |
| 8 | TA 4134 LPL | - | Cutter, L.H., Low-profile | - |
| 9 | TA 4134 LPR | - | Cutter, R.H., Low-profile | - |
| 10 | H 75-6L | - | Carbide Holder, L.H. 6” | - |
| 11 | H 75-6R | - | Carbide Holder, R.H. 6” | - |
| 12 | H 75-8L | - | Carbide Holder, L.H. 8” | - |
| 13 | H 75-8R | - | Carbide Holder, R.H. 8” | - |
| 14 | T 20034 | - | Terminator Tooth, 3⁄4" V-Carbide | 0.8 |
| 15 | T 20078 | - | Terminator Tooth, 7⁄8" V-Carbide | 0.85 |
| 16 | T 306706L | - | Terminator Adapter, L.H. 6” | - |
| 17 | T 306706R | - | Terminator Adapter, R.H. 6” | - |
| 18 | T 306708L | - | Terminator Adapter, L.H. 8” | - |
| 19 | T 306708R | - | Terminator Adapter, R.H. 8” | - |
| 20 | TP 17 | - | Heat Treated Tooth Pocket | - |
| 21 | SP 1916 | - | 1 9⁄16" Alloy Tube Spacer | - |
| 22 | SP 178 | - | 1 7⁄8" Alloy Tube Spacer | - |
| 23 | SP 200 | - | 2”Alloy Tube Spacer | - |
| 24 | SP 238 | - | 2 3⁄8" Alloy Tube Spacer | - |
| 25 | SP 218 | - | 2 1⁄8" Alloy Tube Spacer | - |
| 26 | 34 FW | - | 3⁄4" Flat Washer | - |
| 27 | 34 LW | - | 3⁄4" Lock Washer | - |
| 28 | 34 LN | - | 3⁄4" Lock Nut | - |
| 29 | 34412-8 | - | 3⁄4" x 4 1⁄2" Gr. 8 Bolt | - |
| 30 | 34500-8 | - | 3⁄4" x 5” Gr. 8 Bolt | - |
| 31 | 34512-8 | 3⁄4" x 5 1⁄2" Gr. 8 Bolt | ||
| 32 | 34600-8 | - | 3⁄4" x 6” Gr. 8 Bolt | - |
| 33 | PL 75-10 | - | 10” Carbide Expander | - |
| 34 | PL 75-12 | - | 12” Carbide Expander | - |
| 35 | PL 75-14 | - | 14” Carbide Expander | - |
| 36 | PL 75-16 | - | 16” Carbide Expander | - |
| 37 | BL 3110-10 | - | Block Spacer - Space for 2”Additional Cut | - |
Terminator®, Alligator & Bolt-on Rock & Frost 3.067" Pitch Anti-Back Flex Chain,Teeth & Adapters for DitchWitch® Models R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 & Attachments A/H500,A/H700
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | SH3067HD0632 | ABF, 110,000# Welded Terminator, 6” Cut, 32 Stations | - |
| 2 | N/A | AL3067ABF06D32 | ABF, 110,000# Welded Alligator, 6” Cut, 32 Stations | - |
| 3 | T 20034 | - | Terminator Tooth, 3⁄4" V-Carbide | 0.8 |
| 4 | T 20078 | - | Terminator Tooth, 7⁄8" V-Carbide | 0.85 |
| 5 | 765 BLK | - | Tooth Holder | 0.8 |
| 6 | 765 HDBLK | - | Heavy Duty Tooth Holder | 1.0 |
| 7 | B 105-322 | - | Bolt (3⁄4" x 5 1⁄2") Used with Two Outside Bit Adapters | - |
| 8 | B 105-365 | - | Bolt (3⁄4" x 4") Used with Inside Bit Adapter | - |
| 9 | B 105-372 | - | Locknut (3⁄4") | - |
| 10 | B 105-373 | - | Bolt (3⁄4" x 5") Used with Outside Bit Adapter | - |
| 11 | B 135-958 | - | Carbide Bit Half Cap (B56-C) (765 MB) | - |
| 12 | B 135-959 | - | Carbide Bit Full Cap (B56-B) (765 CB) | - |
| 13 | B 135-058 | - | Carbide Rockbuster (CB56KRB) (765 HB) | - |
| 14 | B 135-973 | - | Bit Adapter L.H. 8" | - |
| 15 | B 135-974 | - | Bit Adapter R.H. 8" | - |
| 16 | B 135-975 | - | Bit Adapter R.H. Center through 6" Cut | - |
| 17 | B 135-976 | - | Bit Adapter L.H. Center through 6" Cut | - |
| 18 | T 306706L | - | Terminator Adapter, L.H. 6” | - |
| 19 | T 306706R | - | Terminator Adapter, R.H. 6” | - |
| 20 | T 306708L | - | Terminator Adapter, L.H. 8” | - |
| 21 | T 306708R | - | Terminator Adapter, R.H. 8” | - |
| 22 | B 135-977 | - | Chain Spacer (Used with Bit Adapter on Outside) | - |
| 23 | B 135-978 | - | Chain Spacer (Used with Bit Adapter on Inside) | - |
Terminator®, Alligator & Bolt-on Rock & Frost Chain, Teeth & Adapters for DitchWitch® Models R60, R65, R6510, R40, 4010, 5010, 7510, 7610, 8020 Using 3.067"P Chain
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | SH3067HD0632 | 3”P, 110,000 Lb.Welded Terminator Chain, 6” Cut, 32 Sta. | - |
| 2 | N/A | AL30670632 | 3”P, 110,000 Lb.Welded Alligator Chain, 6” Cut, 32 Sta. | - |
| 3 | T 20034 | - | Terminator Tooth, 3⁄4" V-Carbide | 0.8 |
| 4 | T 20078 | - | Terminator Tooth, 7⁄8" V-Carbide | 0.85 |
| 5 | 765 BLK | - | Tooth Holder | 0.8 |
| 6 | 765 HDBLK | - | Heavy Duty Tooth Holder | 1.0 |
| 7 | B 105-322 | - | Bolt (3⁄4" x 51⁄2") | - |
| 8 | B 105-365 | - | Bolt (3⁄4" x 4") | - |
| 9 | B 105-372 | Locknut (3⁄4") | ||
| 10 | B 105-111 | - | Bolt (3⁄4" x 4 1⁄2") | - |
| 11 | B 135-958 | - | Carbide Bit Half Cap (B56-C) (765 MB) | - |
| 12 | B 135-959 | - | Carbide Bit Full Cap (B56-B) (765 CB) | - |
| 13 | B 135-058 | - | Carbide Bit Rockbuster (CB56KRB) (765 HB) | - |
| 14 | B 135-973 | - | Bit Adapter (Less Teeth) L.H. 8" Cut | - |
| 15 | B 135-974 | - | Bit Adapter (Less Teeth) R.H. 8" Cut | - |
| 16 | B 135-975 | - | Bit Adapter (Less Teeth) R.H. cc - 6" | - |
| 17 | B 135-976 | - | Bit Adapter (Less Teeth) L.H. cc - 6" | - |
| 18 | T 306706L | - | Terminator Adapter, L.H. 6” | - |
| 19 | T 306706R | - | Terminator Adapter, R.H. 6” | - |
| 20 | T 306708L | - | Terminator Adapter, L.H. 8” | - |
| 21 | T 306708R | - | Terminator Adapter, R.H. 8” | - |
| 22 | B 105-373 | - | Bolt ( 3⁄4" x 5") | - |
| 23 | B 135-977 | - | Chain Spacer, Outside (110,000 Lb.) | - |
| 24 | B 135-978 | - | Chain Spacer, Inside (110,000 Lb.) | - |
| N/S | B 135-979 | - | Chain Spacer, Outside (70,000 Lb. | - |
| N/S | B 135-980 | - | Chain Spacer, Inside (70,000 Lb.) | - |
Terminator®, Alligator & Bolt-on Rock & Frost 2" Pitch Anti-Back Flex Chain, Teeth & Adapters for DitchWitch® Models V30, R30, 2300, 2310, R40, 4010, 5010, 3500, 2200, 3610, 3700, 4500
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | SH20000636 | 2” P Welded Terminator Chain, 6” Cut, 36 Stations | - |
| 2 | N/A | AL200006D36 | 2” P Welded Alligator Chain, 6” Cut, 36 Stations | - |
| 3 | T 20034 | - | Terminator Tooth, 3⁄4”V-Carbide | 0.8 |
| 4 | T 20078 | - | Terminator Tooth, 7/8”V-Carbide | 0.85 |
| 5 | 765 BLK | - | Tooth Holder | 0.8 |
| 6 | 765 HDBLK | - | Heavy-Duty Tooth Holder | 1.0 |
| 7 | B 105-065 | - | 1⁄2" Locknut | - |
| 8 | B 105-076 | - | (1⁄2" x 3") Bolt | - |
| 9 | B 105-110 | - | (1⁄2" x 4 1⁄2") Bolt | - |
| 10 | B 105-111 | - | (1⁄2" x 4") Bolt | - |
| 11 | B 135-952 | - | Chain Spacer (Used with Bit Adapter on Outside) | - |
| 12 | B 135-043 | - | Chain Spacer (Used with Bit Adapter on Inside) | - |
| 13 | B 135-958 | - | Carbide Bit Half Cap (B56-C) (765 MB) | 0.5 |
| 14 | B 135-959 | - | Carbide Bit Full Cap (B56-B) (765 CB) | 0.5 |
| 15 | B 135-058 | - | Carbide Rockbuster (CB56KRB) (765 HB) | 0.5 |
| 16 | B 136-036 | - | Bit Adapter (Less Bit) R.H. Center - Through 4" | 2.3 |
| 17 | B 136-037 | - | Bit Adapter (Less Bit) L.H. Center - Through 4" | 2.3 |
| 18 | B 136-038 | - | Bit Adapter (Less Bit) L.H. 5" | 2.3 |
| 19 | B 136-039 | - | Bit Adapter (Less Bit) R.H. 5" | 2.3 |
| 20 | B 136-040 | - | Bit Adapter (Less Bit) R.H. 6" | 2.3 |
| 21 | B 136-041 | - | Bit Adapter (Less Bit) L.H. 6" | 2.3 |
| 22 | T 20004L | - | Terminator Adapter, L.H. C-4” | 2.3 |
| 23 | T 20004R | - | Terminator Adapter, R.H. C-4” | 2.3 |
| 24 | T 20005L | - | Terminator Adapter, L.H. 5” | 2.3 |
| 25 | T 20005R | - | Terminator Adapter, R.H. 5” | 2.3 |
| 26 | T 20006L | - | Terminator Adapter, L.H. 6” | 2.3 |
| 27 | T 20006R | - | Terminator Adapter, R.H. 6” | 2.3 |
| N/S | T 20008L | - | Terminator Adapter, L.H. 8” | 2.3 |
| N/S | T 20008R | - | Terminator Adapter, R.H. 8” | 2.3 |
Note: For additional bare chain components, see 2” pitch ABF chain section.
Terminator®, Alligator & Bolt-on Rock & Frost Chain, Teeth & Adapters (2" Pitch, 50,000 Lb. Test Chain) for DitchWitch® Models V30, R30, 2300, 2200, 2310, R40, J20, 3500, 3610, 3700, R40, 4500, 4010
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | SH20000636 | 2” P Welded Terminator Chain, 6” Cut, 36 Stations | - |
| 2 | N/A | AL200006D36 | 2” P Welded Alligator Chain, 6” Cut, 36 Stations | - |
| 3 | T 20034 | - | Terminator Tooth, 3⁄4”V-Carbide | 0.8 |
| 4 | T 20078 | - | Terminator Tooth, 7/8”V-Carbide | 0.85 |
| 5 | 765 BLK | - | Tooth Holder | 0.8 |
| 6 | 765 HDBLK | - | Heavy-Duty Tooth Holder | 1.0 |
| 7 | B 105-065 | - | 1⁄2" Locknut | - |
| 8 | B 105-076 | - | (1⁄2" x 3") Bolt | - |
| 9 | B 105-110 | - | (1⁄2" x 4 1⁄2") Bolt | - |
| 10 | B 105-111 | - | (1⁄2" x 4") Bolt | - |
| 11 | B 135-952 | - | Chain Spacer (Used with Bit Adapter on Outside) | - |
| 12 | B 135-043 | - | Chain Spacer (Used with Bit Adapter on Inside) | - |
| 13 | B 135-958 | - | Carbide Bit Half Cap (B56-C) (765 MB) | 0.5 |
| 14 | B 135-959 | - | Carbide Bit Full Cap (B56-B) (765 CB) | 0.5 |
| 15 | B 135-058 | - | Carbide Rockbuster (CB56KRB) (765 HB) | 0.5 |
| 16 | B 136-036 | - | Bit Adapter (Less Bit) R.H. Center - Through 4" | 2.3 |
| 17 | B 136-037 | - | Bit Adapter (Less Bit) L.H. Center - Through 4" | 2.3 |
| 18 | B 136-038 | - | Bit Adapter (Less Bit) L.H. 5" | 2.3 |
| 19 | B 136-039 | - | Bit Adapter (Less Bit) R.H. 5" | 2.3 |
| 20 | B 136-041 | - | Bit Adapter (Less Bit) L.H. 6" | 2.3 |
| 21 | B 136-040 | - | Bit Adapter (Less Bit) R.H. 6" | 2.3 |
| 22 | T 20004L | - | Terminator Adapter, L.H. C-4” | 2.3 |
| 23 | T 20004R | - | Terminator Adapter, R.H. C-4” | 2.3 |
| 24 | T 20005L | - | Terminator Adapter, L.H. 5” | 2.3 |
| 25 | T 20005R | - | Terminator Adapter, R.H. 5” | 2.3 |
| 26 | T 20006L | - | Terminator Adapter, L.H. 6” | 2.3 |
| 27 | T 20006R | - | Terminator Adapter, R.H. 6” | 2.3 |
| N/S | T 20008L | - | Terminator Adapter, L.H. 8” | 2.3 |
| N/S | T 20008R | - | Terminator Adapter, R.H. 8” | 2.3 |
Note: For additional bare chain components, see 2” pitch chain section.
Terminator®, Alligator & Bolt-on Rock & Frost Chain, Teeth & Adapters for DitchWitch® Walk Along Models Using 1.654" Pitch Chain & Accessories
| Ref No. | Part No. | Smart Pt. No. | Description | Weight (lbs.) |
|---|---|---|---|---|
| 1 | N/A | SH16540426 | 1.654”P Welded Terminator Chain, 4” Cut, 26 Stations | - |
| 2 | N/A | AL16540426 | 1.654”P Welded Alligator Chain, 4” Cut, 26 Stations | - |
| 3 | B 135-316 | - | Bit Adapter Center | 0.5 |
| 4 | B 135-317 | - | Bit Adapter L.H. | 0.5 |
| 5 | B 135-318 | - | Bit Adapter R.H. | 0.5 |
| 6 | B17 | - | Carbide Bit | 0.2 |
| 7 | B17-D | - | Lockwasher | 0.02 |
| 8 | B17-10 | - | Tooth Holder | - |
| 9 | T165404C | - | Terminator Adapter, Center | 0.75 |
| 10 | T165404L | - | Terminator Adapter, L.H. | 0.75 |
| 11 | T165404R | - | Terminator Adapter, R.H. | 0.75 |
| 12 | TT1654 | - | Terminator Tooth Only | 0.3 |
| 13 | B 135-319 | - | Tubular Spacer (Used with Bit Adapter on Inside) | - |
| 14 | B 135-320 | - | Tubular Spacer (Used with Bit Adapter on Outside) | - |
| 15 | B 135-936 | - | Flat Spacer (3⁄8") (28,000 Lb. - Chain Only) | - |
| 16 | B 135-937 | - | 5" Flat Spacer (28,000 Lb. Chain Only) | - |
| 17 | B 135-938 | - | 6" Flat Spacer (28,000 Lb. Chain Only) | - |
| 18 | B 136-027 | - | 5" Flat Spacer (34,000 & 38,000 Lb. Chain) | - |
| 19 | B 136-029 | - | 6" Flat Spacer (34,000 & 38,000 Lb. Chain) | - |
| 20 | B 105-162 | - | Bolt 3⁄8" x 2 1⁄4" Used with Bit Adapter on Inside | - |
| 21 | B 105-915 | - | Bolt 3⁄8" x 2 3⁄4" Used with Bit Adapter on Outside | - |
| 22 | B 105-916 | - | Bolt 3⁄8" x 4 1⁄2" Used with Spacer for 5" Cut | - |
| 23 | B 105-917 | - | Bolt 3⁄8" x 5 1⁄2" Used with Spacer for 6" Cut | - |
| 24 | 38LW | - | Lock Washer 3⁄8" | - |
| 25 | B 105-047 | - | Locknut 3⁄8" | - |
| 26 | B 105-101 | - | Flat Washer 3⁄8" | - |
| 27 | B 059-360 | - | Half Link with Connecting Pin (28,000 Lb. Chain Only) | - |
| 28 | B 135-001 | - | Connector Pin with Keeper (All Chains) | - |
Note: For additional bare chain components, see walk-along section.
Drive Sprocket Head Shaft, Components for Ditch Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500, H700
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 1 | B 180-055 | Sprocket Hub | 3.5 |
| 2 | B 140-717 | Split Sprocket | 15 |
| 3 | B 105-302 | Bolt 5⁄8" x 2" | 0.25 |
| 4 | B 180-057 | Spacer Seal | 2 |
| 5 | B 155-703 | O Ring | 0.06 |
| 6 | B 145-475 | Washer | 0.03 |
| 7 | B 155-805 | Seal | 0.25 |
| 8 | B 125-259 | Bearings | 1.5 |
| 9 | B 125-258 | Race | 1 |
| 10 | B 180-071 | Backup Ring | 0.13 |
| N/S | B 145-476 | Washer | 0.20 |
| 11 | B 105-384 | 3⁄4" Washer | 0.06 |
| N/S | B 105-364 | Bolt 3⁄4" X 2" | 0.25 |
| N/S | B 180-064 | Washer 13⁄16" I.D. x 3" O.D. x 1⁄2" | 0.62 |
| 12 | B 165-329 | Drive Shaft | 38 |
| 13 | B 165-903 | Key (5⁄8" Sq. x 43⁄8" Lg.) | 0.25 |
| 14 | B 165-904 | Key (5⁄8" Sq. x 37⁄8" Lg.) | 0.25 |
| 15 | B 165-905 | Key (3⁄4" X 5⁄8" x 31⁄4") | 0.25 |
| 16 | B 165-907 | Key (5⁄8" R2 x 3⁄8") | 0.1 |
| 17 | B 175-604 | Sprocket (100 Q 32) | 26.5 |
| 18 | B 115-003 | Zerk (1⁄4 N.F. Str.) | 0.03 |
| 19 | B 105-313 | Nut | 0.19 |
| 20 | B 180-062 | Dirt Shield | 0.19 |
| 21 | B 141-589 | Sprocket Split Drive 11 Tooth | - |
| 21 | B 125-209 | Bearing Assembly | 1 |
| 22 | B 175-605 | Sprocket (100-B14) | 4.75 |
| N/S | B 175-608 | Sprocket Assembly | 6 |
| N/S | B 130-404 | Chain (100-65 Pitches) | 20 |
| N/S | B 130-402 | Offset Link | 0.35 |
| N/S | B 130-401 | Connector Link | 0.25 |
| 23 | B 170-038 | Power Band V Belts — 2 Belts | 1.85 |
| 24 | B 170-059 | Power Band V Belts — 4 Belts | 1.96 |
| N/S | B 170-609 | Sprocket #100 Q 34 | 28 |
| 25 | B 142-009 | Sprocket (1 Piece) | 16 |
| N/S | B 175-509 | Idler Sprocket #80 – 16 Tooth | - |
| 26 | B 165-379 | Drive Shaft for offset machine | - |
Auger Parts & Accessories for Ditch Witch® Models R40, R60, R65, 4010, 5010, 6510, 7510, 8020 & Attachments A/H400,A/H500, H700 (3" P)
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 1 | B 140-070 | Auger, R.H. (24") | 53 |
| 2 | B 145-071 | Auger, L.H. (24") | 53 |
| 3 | B 145-109 | Auger, R.H. (12") | 28 |
| 4 | B 145-110 | Auger, R.H. (12") | 28 |
| 5 | B 105-407 | Bolt, (5⁄8" x 4") | 0.5 |
| 6 | B 105-357 | Lock Nut (5⁄8") | 0.06 |
| 7 | B 115-001 | Zerk | 0.06 |
| 8 | B 125-517 | Pillow Block Bearing, 13⁄4" I.D. | 10.5 |
| 9 | B 105-466 | Bolt (3⁄4" x 2 1/2") | 0.5 |
| 10 | B 105-372 | Lock Nut (3⁄4") | 0.06 |
| 11 | B 105-384 | Washer (3⁄4") | 0.06 |
| 12 | B 140-725 | Auger Sprocket & Shaft | 35 |
| 13 | B 142-008 | Auger Sprocket | 23.9 |
| 14 | B 165-368 | Auger Shaft | 15 |
| 15 | B 145-244 | Hex Auger Shaft | - |
| 16 | B 140-665 | Auger Sprocket, Hex | - |
| 17 | B 110-363 | Flange (LS) | - |
| 18 | B 110-364 | Flange (NLS) | - |
| 19 | B 125-620 | Hex Bearing Assembly | - |
| 20 | B 125-048 | Hex Bearing | - |
| 21 | B 145-248 | Hex Sprocket Hub | - |
Boom Parts, Sprockets, Bearings, & Accessories for DitchWitch® Models R40, R60, R65, 4010, 5010, 6510, 7510, 7610, 8020 & Attachments A/H400, A/H500, H700
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 1 | B 140-013 | Boom Sleeve | 0.5 |
| 2 | B 140-021 | Boom Spring | 0.8 |
| 3 | B 140-758 | Slide & Stop | 25.6 |
| 4 | B 180-440 | Idler Shaft (Slide & Stop) | 3 |
| 5 | B 105-377 | Nut | 0.5 |
| 6 | B 140-723 | Idler Sprocket (Bearing Kit for Idler Sprocket: see * below) | 26.5 |
| - | B 140-656 | Idler Sprocket Assy, (Includes Sprocket & #’s 7-13) | 24.75 |
| 7 | B 180-244 | Spacer Bearing | 0.1 |
| 8 | B 180-243 | Spacer Bearing | 031 |
| 9 | B 180-026 | Fiber Spacer | 0.1 |
| 10 | B 155-843 | Seal | 0.15 |
| 11 | B 125-265 | Bearing | 1 |
| 12 | B 125-266 | Race | 0.6 |
| 13 | B 115-470 | Retaining Ring | 0.01 |
| 14 | B 180-441 | Idler Shaft (Boom – Idler) | 2.75 |
| 15 | B 150-191 | Grease Cylinder Barrel | 3.5 |
| 16 | B 150-340 | Grease Cylinder Rod | 5.1 |
| 17 | B 150-058 | Grease Cylinder Assembly | 11 |
| 18 | B 155-711 | O Ring | 0.03 |
| 19 | B 155-712 | Back-up Ring | 0.1 |
| 20 | B 115-001 | Zerk (1⁄8") | 0.06 |
| 21 | B 105-367 | Lock Nut (1" NC) | 0.25 |
| 22 | B 105-419 | Bolt (1" NC X 4") | 1.13 |
| 23 | B 140-730 | Idler Sprocket (2" P) | - |
| - | B 140-731A | Idler Sprocket Assembly (14T) (140-659) | - |
| 24 | B 142-756 | 17" End Roller | - |
| - | B 142-756A | 17" End Roller Assembly | - |
| * | B 140-661 | Bearing Kit (includes Reference #’s 7-13) | - |
| N/S | B 140-120 | Boom Gussets | - |
Boom & Drive Parts for DitchWitch® Models C-7, C-9, C77, C99 & 350SX
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 1 | B 140-088 | Boom Assembly (Less Sprocket) | 17 |
| N/S | B 140-090 | Boom Assembly (With Sprocket) | 26 |
| 2 | B 140-499 | Boom Only | - |
| N/S | B 140-498 | Boom Assembly | - |
| 3 | B 140-712 | Sprocket | 6.5 |
| N/S | B 140-653 | Sprocket Assembly (includes ref. #’s 2, 6, 7, 8) | 7.5 |
| 4 | B 140-770 | Slide & Stop | 6.5 |
| 5 | B 115-553 | Boom End Spring | 0.63 |
| 6 | B 115-001 | Zerk Fitting (1⁄8" NPT Str) | 0.06 |
| 7 | B 140-775 | Washer, Shield | 0.25 |
| 8 | B 125-009 | Bearing, Idler Sprocket | 1.5 |
| 9 | B 115-464 | Snap Ring, Idler Sprocket | 0.06 |
| 10 | B 180-445 | Idler Shaft | 1 |
| 11 | B 105-379 | Bolt (3⁄4" x 11⁄4") | 0.19 |
| 12 | B 105-372 | Lock Nut (3⁄4") | 0.1 |
| 13 | B 140-794 | Boom End | 7.6 |
| 14 | B 105-352 | Square Head Set Screw | 0.63 |
| 15 | B 145-099 | Auger | 15 |
| 16 | B 115-465 | Snap Ring | 0.06 |
| 17 | B 140-703 | Drive Sprocket 13⁄8" Bore | 4.2 |
| 18 | B 110-003 | Machinery Bushing | 0.1 |
| 19 | B 155-802 | Seal | 0.1 |
| 20 | B 125-204 | Bearing | 0.19 |
| 21 | B 125-203 | Bearing | 0.44 |
| 22 | B 125-205 | Race | 0.19 |
| 23 | B 180-037 | Seal Cover | 0.2 |
| 24 | B 180-031 | Dirt Shield | 0.1 |
| 25 | B 115-657 | Urethane Washer | 0.06 |
| 26 | B 170-033 | Belt Set (3 Belts) | 2.75 |
| 27 | B 130-006 | Drive Chain (101 P) #40RC | 1.75 |
| 28 | B 130-008 | Drive Chain (103 P) #40 RC | 2 |
| 29 | B 130-001 | Connector Link | 0.09 |
| 30 | B 130-002 | Offset Link | 0.0.2 |
| 31 | B 140-028 | Boom Sleeve | 0.5 |
| 32 | B 105-047 | Locknut (3⁄8") | 0.06 |
| N/S | B 170-006 | Belt Set, C49 - Steel Cable (2) | 1.5 |
| N/S | B 170-001 | Belt Set, (2) Models (C2, C3, C4, C49) | 1 |
| N/S | B 105-146 | Bolt (3⁄8" NC x 21⁄4") | 0.06 |
Boom, Auger & Drive Parts for DitchWitch® Models M Series, 1410, 1420, 1500, 1810, 1620, 350SX, 400SX & Model 2020 using Sprocket Boom
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 1 | B 105-352 | Square Head Set Screw | 0.63 |
| 2 | B 140-038 | Boom Adj. Block | 1.5 |
| 3 | B 105-515 | Cotter Pin (3⁄16" x 3") | 0.06 |
| 4 | B 140-551 | Boom Extension, 1' | 11 |
| N/S | B 140-552 | Boom Extension, 2' | 16 |
| 5 | B 180-445 | Sq. Idler Shaft | 0.2 |
| 6 | B 140-775 | Dirt Shield (2 Required) | 0.25 |
| 7 | B 140-759 | Boom End Slide & Stop, Less Sprocket | 11.07 |
| 8 | B 115-464 | Retaining Ring | 0.06 |
| 9 | B 115-554 | Boom Spring | 1.15 |
| 10 | B 140-028 | Sleeve, Boom | 0.39 |
| 11 | B 140-712 | Idler, Sprocket | 6.5 |
| N/S | B 140-653 | Sprocket Assembly (includes ref. #’s 11, 8, 14, 6) | 7.85 |
| 12 | B 105-379 | Bolt (3⁄4" NC x 11⁄4") | 0.9 |
| 13 | B 125-009 | Idler Sprocket, Bearing | 1.5 |
| 14 | B 140-051 | Boom without Sprocket Assembly | 21.53 |
| N/S | B 140-060 | Boom Complete with Slide & Stop, 2 Sprockets | 54 |
| 15 | B 142-006 | Split Sprocket (142-039) | 6.18 |
| 16 | B 181-361 | Hub for 1410/1420 | 5 |
| N/S | B 184-017 | Hub for 1620 | 5 |
| 17 | B 145-204 | Auger – 1410 & 1420 Only | 27.90 |
| N/S | B 145-183 | Auger – 1810 Only | - |
| 18 | B 140-703 | Drive Sprocket (1410, 1420, 1810 & 1500) | 4.2 |
| N/S | B 130-124 | Drive Chain 1420 #50-92p (not shown) | 3.36 |
Drive Parts for Models M & M422 Series Trenchers
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 1 | B 165-415 | Head Shaft, 8" Pivot - 31" Long | 13 |
| N/S | B 165-416 | Head Shaft, 12" Pivot - 341⁄2" Long | 15 |
| 2 | B 165-944 | Key (1⁄4" x 13⁄4") | 0.10 |
| 3 | B 105-067 | Bolt (1⁄2" N.C. x 23⁄4") | 0.06 |
| 4 | B 105-065 | Nut Lock 1⁄2" N.C. | 0.06 |
| 5 | B 180-031 | Dirt Shield | 0.1 |
| 6 | B 180-037 | Spacer Seal | 0.2 |
| 7 | B 155-802 | Seal | 0.0 |
| 8 | B 110-003 | Bearing Shield | 0.06 |
| 9 | B 125-204 | Cone Bearing | 0.19 |
| 10 | B 125-203 | Cone Bearing W/ Seal | 0.44 |
| 11 | B 125-205 | Bearing Cup | 0.19 |
| 12 | B 115-454 | Retaining Ring | 0.06 |
| 13 | B 180-035 | 8" Pivot Spacer | 1.5 |
| N/S | B 180-036 | 12" Pivot Spacer | 3.5 |
| 14 | B 180-032 | Spacer | 0.1 |
| N/S | B 105-461 | Tang Washer | 0.06 |
| 15 | B 105-331 | Lock Washer | 0.06 |
| 16 | B 105-330 | Adjusting Nut | 0.2 |
| 17 | B 115-465 | Retaining Ring | 0.06 |
| N/S | B 105-704 | 5⁄16" Set Screws | 0.06 |
| 18 | B 140-702 | Drive Sprocket, 13⁄8" Bore | 4 |
| 19 | B 145-047 | Auger | 25 |
| 20 | B 105-352 | Adjusting Screw | 0.63 |
| 21 | B 140-038 | Adjusting Block | 1.5 |
Adjusting Miscellaneous Parts (not shown) for Model M
| Part No. | Description | Weight (lbs.) |
|---|---|---|
| B 140-718* | Sprocket Head Shaft 11⁄8” Bore (M3 - M389) | 4.5 |
| B 140-720* | Sprocket Head Shaft 11⁄4” Bore (M3 - 22 or M329) | 2.5 |
| B 125-010 | Drive Shaft Bearing (M2, M3) | 0.7 |
| B 155-814 | Head Shaft Seal (M3, M389) | 0.05 |
| B 155-815 | Dust & Dirt Seal (M3 - M389) | 0.1 |
| B 165-320 | Head Shaft Drive - 8” Pivot (M3 or M389) | 8.65 |
| B 165-321 | Head Shaft Drive - 12” Pivot (M3 or M329) | 12 |
| B 170-002 | V Belt Set (3) (Model M3) | 2.2 |
| B 170-005 | V Belt Set (3) (Model M) | 3 |
* Measure bore size
Replacement Drive Shaft for DitchWitch® Models C7, C9, C77 & C99
| Ref No. | Part No. | Description | Weight (lbs.) |
|---|---|---|---|
| 22 | B 165-443 | Head Shaft (Replaces # B 165-382) | 11 |
| 23 | B 105-330 | Nut (1-3/8" NF) (Replaces # B 105-380) | 0.25 |
| 24 | B 105-331 | Lockwasher (1-3/8" NF) (Replaces # B 105-381) | 0.06 |
| N/S | B 105-461 | Tang Washer - Not Shown | 0.06 |
Teeth & Accessories for DitchWitch® Trencher Models M Series, C Series, J-20, 1410, 1420, 1500, & 1810 Using 1" Hole Spacing on Side Bars for Cutters
If you have a specific Ditch Witch® trencher part or salvaged trenching machine you are looking for, please call
